Model #ROG 7Y-63 National Acme kitchen-refrigerator compact

  • Replacement Parts
    3 Results

Question and Answers

Q:

Spring #147 connects from #63 to where?

A:

Find a hole in item 63 that is worn around the edge and connect one end of the spring there. Position the spring toward the front of the deck and look just beyond the end of the spring for a hole in the deck that is worn around the edges.

We don't have drawings of where the springs go, but the previous spring wears the paint around the hole it was in and makes it pretty obvious where the spring goes.

Read More
Jimmy K -
Sears Technician
May 07, 2010
Q:

On the question of gears. the diagram also shows 63 and 64 as gears do I need 3 of 64?

A:

I recommend you take the gearbox apart and wash and inspect the gears to find any worn ones. A good practice is to not put a new gear to run with an old one. Traditionally, the old ones don't last long and sometimes damage the new gears.

If you start with disassembling and cleaning the gears and putting new grease on the gears when you reassemble, you will get many years of use from the planer. Replace any gear that is questionable and replace the gears that come in contact with the new one and you will be fine.

Read More
Jimmy K -
Sears Technician
March 15, 2009
Q:

I am looking for the custom panel template sheet and installation instructions for a Bosch SHV68P03UC/63.

A:

Hi Abraham,

Thank you for submitting a question to Manage My Life.

I am sending the information I have on this to the email address you used when you registered on this site.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Landell

Read More
Landell -
Sears Technician
November 28, 2011