Model #RLT-371 Caloric slide-in range, gas

  • (rmt-359) (rlt-360) (rmt-360) (rlt-380) (rmt-380)
    3 Results
  • Top And Burner Assembly (rmt-359) (rlt-360) (rmt-360) (rlt-380) (rmt-380)
    3 Results
  • (rlt-356) (rlt-359) (rlt-370) (rmt-370) (rlt-371) (rmt-381)
    3 Results
  • Top And Burner Assembly (rlt-356) (rlt-359) (rlt-370) (rmt-370) (rlt-371) (rmt-381)
    3 Results
  • Sealed Burner Components (rmt-370) (rlt-371) (rmt-381)
    3 Results
  • Backguard Assembly
    3 Results
  • Oven Components
    3 Results
  • Oven Door Assembly (rlt-356) (rlt-359)
    3 Results
  • Oven Door-black Glass (rmt-359) (rlt-360) (rmt-360) (rlt-380) (rmt-380) (rlt-370) (rmt-370) (rlt-371) (rmt-381)
    3 Results
  • Lower Broiler Component (rlt-356) (rlt-359) (rmt-359) (rmt-360) (rlt-380) (rlt-370) (rmt-370) (rlt-371) (rmt-381)
    3 Results
  • Lower Broiler Component (rmt-380)
    3 Results

Question and Answers

Q:

Attachment for drive control system for self propelled mower model #917 371 930/

A:

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 10, 2011
Q:

Replacement plug for a lawnmower

A:

The part number for the charger on this mower is 190097. The charger includes the plug. You can order this charger from the Sears PartsDirect website. You can view a picture of the part on that website to make sure that it is the correct part.

Read More
Lyle W -
Sears Technician
June 01, 2010
Q:

Washer 417.44082400 fills up with water overnight. I assume I have leaky valve, but can't figure out how to remove it to test

A:

Thank you for your question. I am sorry you are having a problem with the washer. I sound like you have narrowed the problem down to the valve. On this model, the valves come as one part. The part number for the valve assembly is 134371210 and can be ordered from our parts website: Sears Parts Direct .

I have included a set of illustrated instructions (See below). These should step you through the process of replacing the valve. Please make sure to unplug the washer before attempting any service on the washer.

If you need further assistance on the repair of the washer, please reply below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 28, 2011
A:

Thank you for the reply. To remove the wire connector you have to lift the locking tab with a small screwdriver. I have provided you with an image below showing where to put the screwdriver. Once the tab is lifted, wiggle the connector side to side while pulling. It should come off. Please let me know if you have any problems.

Read More
Mark T -
Sears Technician
March 01, 2011
See more answers