Model #REG-183A Comfort-aire air conditioner -room

  • Room A/c
    3 Results

Question and Answers

Q:

kenmore model 790 bottom oven burner flame too high

A:

Thank you for your question and I understand your concern.

Based on your symptom and details you will now need to access the bake burner orifice/burner spud and turn it clockwise until it is bottomed out. This must be done when converting the range to LP gas. You will also need to adjust the air shutter on the bake burner to obtain the best blue flame possible.

Without knowing the model number of your range I can not provide any other specific LP conversion instructions. Generally speaking the surface burner orifices will have to be removed and replaced with LP orifices as well as converting the pressure regulator to LP.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
April 24, 2012
Q:

Replacement part for Frigidaire drop in REG 533mn-3

A:

Thank you for your question and I understand your concern.

The oven door hinges appear to be no longer available through Sears. You may want to try this web site and they may have the door hinges .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
February 06, 2012
Q:

When will my question be answered?I reg. and asked a question on the 2nd. and got an email on the 4th but no response yet!

A:

I am showing that your previous question was answered by Expert_Jimmy K in this manner:

I think if you remove parts 38, 40, 46, and maybe 39, you can access the pusher assembly. You should take it apart before ordering parts. There might be something worn that you will find when you disassemble.

I apologize if you did not properly receive this previous answer.

Read More
Lyle W -
Sears Technician
August 10, 2009