Model #RBS305PDB6 Whirlpool built-in oven, electric

  • Oven
    3 Results
  • Oven Door
    3 Results
  • Internal Oven
    3 Results
  • Control Panel
    3 Results
  • Top Venting
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Removing wall oven door RBS305PDB6 RBS305PDB6 Whirlpool Electric wall oven

A:

Page 13 in your owner's manual shows how to remove the door from the oven. Note: The oven door is heavy. Use a helper if necessary when removing that door.

Read More
Lyle W -
Sears Technician
July 15, 2014
Q:

My wall mount oven won't heat up. I tried to self clean. Ever since it doesn't heat up. Model #RBS305PDB6 - WHIRLPOOL Electric wall oven

A:

Thank you for your question.

Not having your wall oven working can be very inconvenient.

The problem usually is the thermal limiter has failed on the back wall of the oven.

You will need to remove the oven from the wall and support if from the bottom so you can remove the back panel to get to the thermal limiter. I will send you by e-mail the installation instruction for the oven so you can see how to uninstall the oven to get to the failed part.

The part number for the thermostat limiter is;9759243, and you can purchase that from; Sears Parts Direct .

  • Before you remove the oven from the wall installation please REMOVE POWER to the oven.

  • Once you have the oven out, remove the back wall panel to gain access to the failed thermal limiter.

  • Unplug the wires and remove the limiter and replace with the new one.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

I hope this information will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 07, 2010
Q:

Why won't my oven heat up after stopping the self cleaning cycle before it was finished?

A:

The thermo-disc has likely tripped open which will prevent oven operation. If the oven door is not sealing properly the escaping air from the top of the oven door can be drawn in by the cooling fan and blown across the thermo-disc and cause it to trip and break line 2 circuit to the bake and broil element.

I recommend calling a service technician to repair your built in oven.

Read More
Joey S -
Sears Technician
September 22, 2009