Model #RA-202 Ryobi saw radial

  • Blade Guard/armature/motor Housing
    3 Results
  • Main Table / Base
    3 Results

Question and Answers

Q:

display codes 110.42822 202

A:

Thank you for your question and I understand your concern.

I added an image below with the list of fault codes. I added a second reply with the same image but it should open larger.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 25, 2013
A:

Holley: See image below. It should open larger.

Read More
Joey S -
Sears Technician
January 25, 2013
See more answers
Q:

Schwinn 202 model power issue..

A:

Thank you for your question. I am sorry you are having a problem with the exercise bike. If the console continues to beep and cycle, I recommend checking the wire connections first. To do that you need to unplug the unit and remove the console. Then unplug the wires and plug them back in. Next separate the up right from the base to inspect the wires to be sure there are not ant pinched. If those are ok, I recommend accessing the tension motor. Once you have access to the tension motor check the connections in that area. Finally plug the unit back in and check the operation. If it still will not operate, I recommend having a service technician come out to diagnose the problem. The reason is a meter is required to make some electrical checks to confirm the problem. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 15, 2013
Q:

How do I fix my Schwinn 202 recumbent bike?

A:

It appears that the unit is basically non serviceable. There is no troubleshooting information or a parts breakdown of the resistance mechanism. It would not be worth wasting any time attempting to disassemble the unit because there are no serviceable parts regarding the resistance mechanism. You would have to separate the housing in order to access the mechanism but it does not appear that it's made to come apart.

Read More
Joey S -
Sears Technician
December 24, 2009