Model #PV-7200 Panasonic vcr

  • No Image Available - Fidelitone
    3 Results

Question and Answers

Q:

Amana 7200 Washer Pump

A:

Thank you for your question and I understand your concern.

Without having the model number copied from the model and serial number tag I can only assume this a Front Loading washer because top loading Amana washers do not have an electric drain pump. The drain pump is driven directly by the motor shaft. The drive motor must run in the drain and spin and drain direction in order to pump the water out.

If this is a front loading washer, the drain pump will require a 120 volts in order to operate. The voltage supply to the drain pump is controlled by the main control board (PCB). The "nd" will display if the water level fails to drop below the low water level reset with 15 minutes, before spin. I added an image below of the wiring diagram of a Front loading Amana washer model NFW7200TW10.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
October 30, 2012
Q:

Why does my Stanley 7200 garage door opener just hum when remote/wall buttons are pressed?

A:

Information on Stanley garage door openers is extremely limited due to the company that manufactured them being out of business. The image below shows a page from the owner's manual that describes troubleshooting. It provides an explanation for blinking light codes on a Stanley model. This may help explain why your garage door opener will not open the door. If the lights are blinking in a pattern that indicates the door beam sensors are not aligned, try operating the door by holding down the wall control button. If the door operates then you could have wiring problem or a failed beam sensor.

If you are able to find your original owner's manual, it may have more troubleshooting information that pertains to your particular model.

Read More
Lyle W -
Sears Technician
April 27, 2009
Q:

Dimensions of refrigerator without the doors and hinges.

A:

I did not find a PDF file with specific dimensions of the cabinet with out the doors and hinges for this refrigerator. The image below shows the installation clearance specifications and the dimensions of the refrigerator. These are the only dimensions that I have available for that model of refrigerator. The width and the depth shown below should be accurate for the base of that refrigerator.

I hope that this information helps. If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
July 27, 2011