Model #PS-LX235 Sony turntable

  • Replacement Parts
    3 Results
  • Stylus
    3 Results
  • Cabinet And Chassis
    3 Results
  • Chassis
    3 Results
  • Record Changer
    3 Results

Question and Answers

Q:

Sony Turntable ps lx250. Looks like start stop buttons are NOT connected to anything.

A:

If you look at the previous answer I sent, I attached two diagrams. It looks like spring 156 engages the leaf switch 114. Although you say it's not physically connected, you should be able to tilt location 113 to the same affect. I don't see a power board or what we engaged when we push on 114 with the knob but I would suspect it’s a transistor being turned on that is not listed in the exploded view. I do not have any additional diagrams than what was sent.

Read More
David A. - Personal Solutions Manager -
Sears Technician
March 20, 2009
Q:

PS to Kenmore vertical zig zag sewing machine model 15813410

A:

Thank you for your question on the model 158.13410 sewing machine.

I am not quite sure what you are asking. Did you want an open toe darning for darning?

I think that foot should work fine for your machine. However I am only 95% sure it will fit your machine.

Most likely it will by the detail description.

Sam A.

Read More
Sam A -
Sears Technician
September 10, 2012
Q:

I have a Craftsman gas chainsaw model 353690 ps. The chain tightens while cutting. The bar has not moved. What's wrong?

A:

The chain might be kinking as it runs and heats up. If the bar is not moving, and the chain is getting tighter, the chain needs to be replaced.

When you say the chain is getting tighter, are you talking about tighter on the bottom of the bar? This is normal as the sprocket drives the chain.

Check the groove in the bar for damage or wear. The teeth have to slide through the groove smoothly. The bar wears over time and the groove gets shallower. You might also need a new bar.

Read More
Jimmy K -
Sears Technician
November 03, 2009