Model #PRO-R05U Pioneer plasma television

  • Cabinet Parts
    3 Results

Question and Answers

Q:

Pro form C970 treadmill Pro form C970

A:

The controller may not be detecting a speed signal from the magnet and reed switch. I recommend checking the reed switch located on the left side of the front roller. Unplug the treadmill before accessing internal components. 

The magnet on the front roller pulley triggers the reed switch. Turn the roller so the magnet is aligned with the reed switch. The end of the reed switch should be about 1/4-inch to 1/8-inch away from the magnet. If it is further away than that, adjust the reed switch position closer to the magnet. While you have the hood removed, check the reed switch wire connection to the motor controller. Repair the wire connection if necessary.

If the reed switch is position and wiring connections are okay, then you may need to replace the motor controller and/or the console. Additional wiring and voltage checks are necessary to determine the cause of your problem if the reed switch is working properly.

Reply with additional details if you need more help diagnosing and repairing this problem.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
March 30, 2015
Q:

Will there be a new model of the Kenmore Pro range out soon?

A:

I am not aware of any new models of Kenmore Pro ranges that are planned for release in the near future. The current models of Kenmore Pro ranges have not changed much for several years.

When new models of the Kenmore Pro ranges are released, they typically have improvements in controls and features.

You may periodically check the Sears.com website for new models of Kenmore Pro ranges. The Sears.com website will normally have the new ranges featured whenever they are released.

Read More
Lyle W -
Sears Technician
November 21, 2009
Q:

Pro form Treadmill will not turn on.

A:

Thank you for your question.

I am sorry you are having a problem with the treadmill. if the treadmill is not working and you have checked the outlet and the breaker the problem could be the on/off switch in the console, open thermo switch in the motor, or a defective motor control. I have provided you with a wiring diagram and a diagnostic flow chart below. if you have a volt meter and can safely check live voltage I recommend following the flow chart. Once you have pin pointed the problem you can order the needed part from out parts website Sears Parts Direct .

If you do not have a volt meter or are confident repairing the treadmill yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please reply below if you have any other questions.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 19, 2011