Model #PL-ACTLAS-II Epson printer

  • No Image Available - Wards
    3 Results

Question and Answers

Q:

Hello, I am trying to repair craftsman lawn mower # 917376080,cleaning done per manual, now need to fit two spring (Return and other one) pl let me know howtodo

A:

Thank you for your question.

I will be happy to assist you with the mower. I have posted an image below showing how the springs connect to the mower. Click on the image to enlarge it. I have found using needle nose pliers make connecting the springs easier.

If you need further assistance, please reply below with more details.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 13, 2011
Q:

tool parts i ii

A:

Thank you for your request on the router switch.

I am sorry that the switch is no longer available.

Please send me your model number and brand name of the router and I will be happy to see if I can find one for you.

Sam A.

Read More
Sam A -
Sears Technician
November 28, 2011
Q:

craftsman II lawnmower

A:

Thank you for your question.

I am sorry you are having a problem with the mower. If the starter rope will not come out, I recommend checking the oil level first. If the engine does not have oil, it might be seized up. If the oil level is fine, go ahead and remove the spark plug from the engine. Then try to pull the starter rope. If it still will not come out, leave the spark plug out. Then tip the mower onto its side so the air filter is pointing up. With gloved hands try to turn the blade. If the blade will not turn in either direction, I suspect the engine is seized. The cost to repair the engine would exceed the value of the mower.

If the blade will turn tip the mower back over and try to pull the rope. If it still will not come out, I recommend checking the starter and the engine control. First, remove the starter from the motor. Then see if the rope came off the pulley. If the rope came off the pulley that will likely be the cause of the problem. If the starter works fine off the engine, I suspect the engine control is not being released. When the engine control bail is pulled, the cable should pull on the engine control, and release the brake. If the cable is broken, the brake will not release resulting in not being able to pull the rope out.

I hope this is helpful. If you need further assistance on the mower, please reply below with more details.

Thank you for using Manage my life.

Mark.

Read More
Mark T -
Sears Technician
April 15, 2012