Model #PH060-5C Janitrol air-conditioner/heat pump(outside unit)

  • Chassis
    3 Results
  • Coils & Compressors
    3 Results
  • Blower Assembly
    3 Results
  • Control Panel Assembly
    3 Results

Question and Answers


Proform 745CS tightening screw for belt doesn't tighten


Thank you for your question.

I am sorry you are having a problem with your treadmill. I looked at the picture you have submitted. The problem is the end cap broke. The end cap holds the adjusting bolt away from the waling board. If you look at the other side, you will see how the end cap supports the bolt. The only way to repair this is to replace the end cap. The part number for the end cap is 161702 and can be ordered from our parts website: Sears Parts Direct .

To replace the end cap you have to remove both rear adjusting bolts. Then remove any screw on the bottom that secures the end cap to the frame. Once all the screws are removed, tap the end cap off the end of the frame. Then reassemble the treadmill using the new end cap. The image below will aid in adjusting the belt.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 11, 2012