Model #PDCS1NBWALSS Ge bottom-mount refrigerator

  • Doors
    3 Results
  • Freezer Section
    3 Results
  • Freezer Shelves
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Shelves
    3 Results
  • Case Parts
    3 Results
  • Machine Compartment
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

my ice maker stopped making ice, i replaced valve in back that regulates the water to the maker, didn't fix. Still not making ice?

A:

Based on your description, it is likely that you will need to replace the ice maker assembly (part WR30X10087). Your refrigerator should have the electronic ice maker model that is shown in the drawing in the second image or the photograph shown in the third image below. You can manually cycle that type of ice maker using the procedure shown in the first image. Unplug the refrigerator for 5 minutes and then plug it back in to set up the ice maker for that diagnostic test mode. If the ice maker cycles in that test model and fills properly but will not continue to cycle, then you will need to replace that assembly. That part WR30X10087 should be the ice maker assembly that you need if your ice maker looks like the ones shown in the second and third images below. You can order that part from the Sears PartsDirect website. Here is a direct link for that part: Electronic Ice Maker Assembly . Be sure that you unplug the refrigerator before accessing and replacing internal components.

If the ice maker will not cycle, you could have a wiring failure in that circuit. The 4th image shows the wiring diagram for that refrigerator. That may help you check the wiring connections. Be sure that you unplug the refrigerator before accessing internal components.

If you get to a point where you need to have a service technician repair this failure, you can schedule one through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 19, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
December 19, 2011
See more answers