Model #PD-4300-S Pioneer compact disc

  • No Image Available - Fidelitone
    3 Results

Question and Answers

Q:

I need the cable diagram for the WeiderPro 4300.

A:

Here is a link for that owner's manual on that weight system: Owner's Manual . That manual has the routing information for the cable.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
May 11, 2011
Q:

9030 Singer Sewing machine PD test question 9030 SINGER SEWING MACHINE

A:

Thank you for your test question on the Singer model 9030 sewing machine.

I will be happy to help you with your sewing machine if you will give me a little more information as to what you need.

Please reply with your question about the sewing machine.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
August 20, 2012
Q:

Dryer not getting hot

A:

Sorry to hear about your dryer not heating consistently but I believe the problem based on your details are weak solenoid coils.

Remove the lower access panel and watch and monitor the glow bar igniter for 10 minutes or so. If you find the ignitor glowing red and then fading off without any burner ignition, replace both coils on the gas valve. I added an image below with instructions on replacing the coils. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Another thing that can cause the ignitor to stay off for long periods of time is a restricted or blocked vent system. If the vent hose or vent cap is restricted or blocked it will cause the high limit thermostat to open and remain open for a long time and not allow the ignitor to come back on until the high limit thermostat cools and resets.

You can order the coils from Sear Parts Direct .

Read More
Joey S -
Sears Technician
October 08, 2010