Model #P67224-2C Amana misc hvac

  • Front Cover
    3 Results
  • Cabinet
    3 Results
  • Support Brackets
    3 Results
  • Condenser Assembly
    3 Results
  • Compressor
    3 Results
  • Blower Assembly
    3 Results
  • Replacement Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Base
    3 Results
  • Blower Assembly
    3 Results
  • Compressor
    3 Results
  • Dual Blower Assembly
    3 Results
  • Control Box
    3 Results
  • Terminials
    3 Results
  • Parts List-text
    3 Results

Question and Answers

Q:

touchscreen thermostat is locked.

A:

James R. provided you with a link for the owner's manual for this thermostat. Follow the procedure on pages 21 and 22 to enter the User Setup mode. Page 22 shows you how to advance through the User Setup Settings. Table 5 on page 23 shows the screen lockout settings. Go to function 0670 and change the screen lockout setting to 0.

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
November 27, 2010
Q:

How do you repair a slow pulling Self-Propelled Lawn Mower? It is a model 10302 4.5Hp LawnBoy.

A:

I am sending you the part numbers for the clutch parts you probably need. Look at the serial number on your lawn mower and confirm it is within the serial number range shown.

11 Diagram: 10302, Silver Series Lawnmower, 1993 (SN 3900001-3999999) REAR AXLE ASSEMBLY TLB Lawn Boy 65-4710 Ring-Friction Your price: $1.91 0 of these in your cart Qty: Add to cart 12 Diagram: 10302, Silver Series Lawnmower, 1993 (SN 3900001-3999999) REAR AXLE ASSEMBLY TLB Lawn Boy 65-4760 Washer-Clutch, Plastic Your price: $1.32 0 of these in your cart Qty: Add to cart

Read More
Jimmy K -
Sears Technician
June 24, 2009
Q:

Small Spring on lawn mower

A:

Thank you for your question. I am sorry you are having a problem with the mower. I looked at the image you submitted. The spring connects between the throttle shafts on the carburetor to the governor lever. The spring should have a hook on each end. I posted an image below that shows the holes the spring connects too. Click on the image to enlarge it. If you need, I don’t think it will cause any harm if you bent a hook on the end without one now.  I hope this is helpful. Please let me know if you need further assistance.  Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
June 18, 2013