Model #OSC-140-4 Amana misc hvac

  • (ol-84) (ol-96) (ol-96-3) (ol-112) (ol-112-4) (ol-140) (ol-140-4)
    3 Results
  • (oh-84d) (oh-96d) (oh-84) (oh-84-3) (oh-96) (oh-96-3) (oh-112) (oh-112-4) (oh-140) (oh-140-4) (oh-168) (oh-168-4) (oh-184) (oh-184-5)
    3 Results
  • (osc-96d) (osc-96) (osc-96-3)
    3 Results

Question and Answers

Q:

When looking at the heat diffuser replacement, unless I'm missing something It's a single part? not a package of 4? For $35+ each, so approx $140-$160 for 4???? 12216641901 Kenmore Gas grill

A:

Thank you for your question. 

I am sorry you are having a problem with the Kenmore grill model number 12216641901.   I will be happy to assist you. I looked up the heat diffusers for your grill. The parts listed are priced per piece. You will need 4 diffusers and 4 burners. Before you decide to get a new grill, I recommend checking burners. You may be able to clean the burners with a wire brush and they will be fine if they are not rusted through. If you decide to purchase a new grill, you can view the ones we have to offer.  Kenmore grills.

 

I hope this is helpful. Please let me know if you need further assistance.   Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
May 19, 2013
Q:

Lawn Tractor #917 287 140

A:

Thank you for your question. The bagger I show listed for the tractor is 917249030. I looked up the lower chute for that model and it is part number 405455. the lower chute can be ordered from our parts website: Sears Parts Direct . I believe the lower chute is compatible with the bagger you have. We do not have any bagger here to confirm the tube sizes.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 16, 2011
Q:

What pressure does part number Z-D21299 switch cut off at? My 125PSI comp. reaches 140 and hasn't cut off yet.

A:

The 125 psi pressure switches will normally open between 125 and 140 psi.

Be sure the safety valve is working by pulling the ring and letting it cut off by itself as the pressure goes down. After verifying the safety valve is working, let the pressure in the tank reach 150 psi. If the pressure switch turns off before the pressure relief opens, you can use the compressor with the old pressure switch.

If the pressure relief opens, replace the pressure switch. I would recommend replacing the pressure switch for safety reasons either way.

Read More
Jimmy K -
Sears Technician
December 22, 2009