Model #OKIDATA 120 Oki Data computer/printer

  • Unit
    3 Results
  • Printer Unit 1/2
    3 Results

Question and Answers

Q:

220 to 120 volt conversion

A:

Thank you for your question.

I will be happy to assist you with your question. I have looked up the model number you have submitted. This model laundry center is a 220-volt unit and cannot be converted to operate on 110 volts. If you have moved to a new location you could have an electrician wire a in a new outlet. This would be cheaper the buying a new unit.

If the unit could be converted to 110 volts the dryer would not heat very well and would take forever to dry the clothes.

Please feel free to reply below if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 27, 2011
Q:

GE profile advantium 120

A:

There may be a fuse in the microwave that is preventing it from powering up but that type of failure will need to be diagnosed and repaired by a technician. I agree with Marc in the above response. Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as replacing fuses, can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.

Read More
Lyle W -
Sears Technician
January 22, 2013
Q:

What does the 120/240 volt plate on my dryer mean?

A:

Basically, it means the dryer requires a 240 volt voltage supply to plug into. The 120 means that there are components inside the dryer that operates on 120 volts and the heating element requires 240 volts to operate. Overall you have 220 volt electric dryer and the newer dryer will operate fine if it's an electric dryer requiring the same voltage supply. Now, the power cord on the new dryer may or may not fit the wall outlet. Dryer cords can be a 3 prong cord or a 4 prong cord. If the dryer cord on the older dryer does not match the power cord on the newer dryer you can swapped out the two power cords so that it will plug into the 240 volt wall outlet.

(See image below for electrical connections and instructions)

Read More
Joey S -
Sears Technician
April 23, 2009