Model #MV1502B-01 Goldstar microwave/hood combo

  • Door Parts
    3 Results
  • Controller Parts
    3 Results
  • Oven Cavity Parts
    3 Results
  • Latch Board Parts
    3 Results
  • Interior Parts (i)
    3 Results
  • Interior Parts (ii - Ii)
    3 Results
  • Installation Parts
    3 Results

Question and Answers

Q:

installing gold star under counter microwave. where can i get the brackets

A:

Thank you for your question.

I can understand wanting to have the mounting plate for the microwave.

If you did not have the parts for the microwave in the box or mounted to the back wall of the microwave then here are the part numbers for the mounting plate and the hardware kit.

Mounting plate: 3300W0A018A.

Hardware pack: 3861W1A043A. And both of these are available from:Sears Parts Direct .

I hope this is what you are looking for.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 11, 2011
Q:

Repair microwave Gold Star Mv1502B/01 Everything works but the oven. Can I replace the circuit board or something simple to make it work?

A:

Thank you for your question.

I am sorry you are having a problem with the microwave.+ Check your settings to make sure that the microwave is set to heat on the high setting. If the microwave is running with no heat that would indicate an internal failure has occurred. We do not give out much repair information on microwaves because of the dangers of repairing them. The microwave generates extremely high voltage. The capacitor can store this voltage even when the unit is unplugged. I hope you understand our policy on microwaves. Our number one concern is your safety. It is strongly recommended to have the microwave repaired by a service technician. You can have the microwave repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Depending on the age and the condition of the microwave, you may consider purchasing a new one. The price of microwaves has gone down a lot in the last few years. Please click on this link to view all of the microwaves we offer.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 07, 2012
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008