Model #MEDZ600TW1 Maytag residential dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why won't my Maytag Electric Dryer Model MEDZ600TW1 start?

A:

Based on you details, you have the technical data sheet that came with the dryer. You did not indicate if it passed the door switch test or not. Based on your symptom there is a good chance that the door switch is not closing or there could be a loose wire in the door switch circuit somewhere between the door switch and the machine control board. A failed door switch or a broken belt will both prevent the dryer from starting. Put the dryer in the test mode again per the technical data sheet and perform the door switch test. If it passes, check for a broken belt of a failed broken belt switch. NOTE: Disconnect the power cord from the power source before removing the lower panel or rear panel for servicing.

Read More
Joey S -
Sears Technician
March 17, 2010