Model #MC-V210-01 Panasonic vacuum, upright

  • Nozzle Housing Assy
    3 Results
  • Agitator Assy
    3 Results
  • Body,motor,housing/motor
    3 Results
  • Motor Fan Assy
    3 Results

Question and Answers

Q:

I have a Kenmore canister vacuum. Need to install new Hepa media filter. Which way does it go in? What direction should the black arrow point? Up or down?

A:

Thank you for your question.

I can understand wanting to know which direction to install the filter.

You always put the filter in with the arrows pointing the direction of the air flow.

The filter arrow should be pointing out on this model.

I have given you a picture of the proper filter replacement procedure.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 01, 2011
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008
Q:

LG Model #LDS5811ST/01

A:

Check the child lock function to make sure that function is not enabled as shown in the first image below. You did not indicate the error code that you are seeing on the dishwasher. The second and third images show the error codes for this type of dishwasher. If you see one of these error codes, you may be able to perform some of the troubleshooting shown in those images. Be sure that you shut off the circuit breaker for the dishwasher to completely disconnect electrical power before accessing internal components. If you need more help, reply with additional details (error code being displayed) and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011