Model #LWD70AW-PLWD70AW Amana residential washers

  • Miscellaeous Information
    3 Results
  • Control Panel
    3 Results
  • Cabinet Top, Loading Door, And Door Swit
    3 Results
  • Mixing Valve And Hose(inlet, Filler, And
    3 Results
  • Motor, Belt, Pump, And Idler Assy
    3 Results
  • Agitator, Drive Bell, Washtub And Hub
    3 Results
  • Outer Tub, Cover, Pressure Tube, And Cou
    3 Results
  • Weldment And Bearing Assy, Brake And Pul
    3 Results
  • Front Panel, Base And Cabinet, And Speci
    3 Results
  • Connection Blocks, Extractor Tool, And T
    3 Results

Question and Answers

Q:

Washer not spinning fast enough to eject water prior to drying

A:

The procedures for replacing the drive belt in this type of washer are shown in the 4 images below. Be sure that you unplug the washer before accessing internal components. The first image shows how to remove the front panel. I recommend that you check the belt before replacing it. If it is worn and slipping, then it will need to be replaced. The other images show how replace the belt. You will need to carefully remove that drain pump to get the belt off and replace it. Be sure that you route that belt properly when replacing it.

This repair is normally completed by a technician. I recommend that you carefully review the procedures provided below. If you are not completely confident that you can properly replace that belt, I recommend that you schedule a service technician to repair the washer. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 30, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
March 30, 2011
See more answers