Model #LV675-851514 Kohler engine

  • Crankshaft
    3 Results
  • Crankcase
    3 Results
  • Oil Pan/lubrication
    3 Results
  • Head/valve/breather
    3 Results
  • Ignition/electrical
    3 Results
  • Blower Housing And Baffles
    3 Results
  • Starting System
    3 Results
  • Fuel System
    3 Results
  • Engine Controls
    3 Results
  • Air Intake/filtration
    3 Results
  • Exhaust
    3 Results
  • Cooling System
    3 Results

Question and Answers

Q:

What are the torque specifications for head bolts, intake and rocker bolts on Kohler engine LV675?

A:

The torque specifications for the rocker bolts, intake and head bolts are shown in the images below. If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
April 16, 2010
Q:

How do I remove Part # 851514 on my Craftsman Lawn Mower Blade Adapter? It is Key # 46 on the Sears exploded view.

A:

Thank you for your question. I am sorry you are having a problem removing the adapter. To remove the blade adapter the gas should be drained or ran out of the tank so the lawnmower can be placed on the side. Lay the mower so the carburetor and air cleaner are up.

Block the blade with a piece of wood and remove the blade bolt and blade. The blade adapter should pull off the engine shaft unless it is rusted to the engine shaft.

Try spraying rust buster between the engine shaft and the blade adapter and tapping the blade adapter with a hammer to help the rust buster penetrate. Tap on the back side of the blade adapter to tap it off the engine shaft.

If this procedure doesn’t work, put the blade bolt back into the engine shaft and tighten it until the head is about ½ inch from the blade adapter. Use a gear puller to pull the blade adapter off the shaft.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Please let me know if you need further assistance. Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 11, 2011
A:

Thank you for your question. I am sorry you are having a problem removing the adapter. To remove the blade adapter the gas should be drained or ran out of the tank so the lawnmower can be placed on the side. Lay the mower so the carburetor and air cleaner are up.

Block the blade with a piece of wood and remove the blade bolt and blade. The blade adapter should pull off the engine shaft unless it is rusted to the engine shaft.

Try spraying rust buster between the engine shaft and the blade adapter and tapping the blade adapter with a hammer to help the rust buster penetrate. Tap on the back side of the blade adapter to tap it off the engine shaft.

If this procedure doesn’t work, put the blade bolt back into the engine shaft and tighten it until the head is about ½ inch from the blade adapter. Use a gear puller to pull the blade adapter off the shaft.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Please let me know if you need further assistance. Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 11, 2011
See more answers
Q:

installing part

A:

Thank you for your question.

To remove the blade adapter the gas should be drained or ran out of the tank so the lawnmower can be placed on the side. Lay the mower so the carburetor and air cleaner are up.

Block the blade with a piece of wood and remove the blade bolt and blade. The blade adapter should pull off the engine shaft unless it is rusted to the engine shaft.

Try spraying rust buster between the engine shaft and the blade adapter and tapping the blade adapter with a hammer to help the rust buster penetrate. Tap on the back side of the blade adapter to tap it off the engine shaft.

If this procedure doesn’t work, put the blade bolt back into the engine shaft and tighten it until the head is about ½ inch from the blade adapter. Use a gear puller to pull the blade adapter off the shaft.

With the blade adapter off the debris shield will slide off the engine shaft.

Please let me know if you need further assistance with the repair of the mower.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 13, 2011