Model #LN-R328W Samsung lcd television

  • Cabinet Parts
    3 Results

Question and Answers

Q:

How to replace the brake switch on 917.273130 Ln Trac.

A:

Thank you for your question.  I am sorry you are having a problem with the tractor. I know it can be tricky to remove the brake switch. The first thing I would do is remove the drive belt. This allows the triangle part to move further back. This usually gives you enough room to remove the switch. If you have enough room to remove the switch, squeeze the tabs on the top side and push it down. Once it is removed just push the new switch in from the bottom.  I hope this is helpful. Please let me know if you need further assistance.   Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
April 24, 2013
A:

Bernie. I am sorry the advice did not help. If you have a way to post a picture I would like to the set up you have. Therefore, I will not give the same information again. Before you break out the old switch I recommend connecting the new switch and operate it manually to be sure it will fix the tractor. I would hate to see you break out the old switch and find you cannot get it in and it was not the problem. Mark

Read More
Mark T -
Sears Technician
April 28, 2013
A:

With the button pushed, you should have continuity between the two terminals where the white wires connect. You should also have continuity between the two terminals where the blue wires connect. When the button is released, you should not have any continuity between any of the terminals. Please let me know what you find. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
May 08, 2013
A:

Bernie, I am glad to hear you have the tractor up and running again. The video is great for checking the old style switches. You have a newer style that work different. Please keep us in mind if you have any other problems with the tractor or anything else around the house. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
May 09, 2013
See more answers
Q:

where and how are the gas lines connected to the carb and into the gas tank.

A:

Thank you for your question.

I see that you have gotten this figured out. Please keep us in mind next time you have problems with items around the house.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 03, 2012
Q:

I need a 1 7/8" hitch ball for my Craftsman 42" 21HP mower.

A:

Thank you for your question.

I will be happy to assist you. We have this question a few times a year. We only recommend using tow behind equipment we sell or that are made for lawn and garden use. This is why the hole is smaller. Some customers where installing trailer hitch balls on their tractors and towing large trailers. This is dangerous. If the trailer is heavier than the rear of the tractor, you might not be able to stop. I personally had a customer that was using his new garden tractor to move his empty car hauler. His house was on a hill and the driveway was wet. When he started down the hill, he could not stop. The wheels stopped but the wheels just slid on the pavement. The tractor turned sideway, rolled, and tossed him off causing serious injury. The trailer continued to push the tractor down the hill on its side. I believe the customer ended up purchasing another new tractor because the other was a total loss.

I am sorry the sale associate told you could attach a ball to the tractor. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark

Read More
Mark T -
Sears Technician
April 10, 2012
A:

Jerry, I am sorry about this. I encourage you view the link I have posted below. It will give you ideas to mount a ball to your tractor. Although I do not recommend doing this, it can be done. If you decide to go with another tractor please be sure to check the warranty information for towing. I do not know of any manufacturers that will cover drive damage if the tractor has a 1- 1/8 ball attached to it. Do not ask the salesman check in the manual. I hope this is helpful. Please let me know if you need further assistance.

Read More
Mark T -
Sears Technician
April 14, 2012
See more answers