Model #LDE7314ACE Maytag residential dryer

  • Control Panel (lde7314ace) (lde7314acl) (lde7314ade) (ldg7314aae) (ldg7314aal)
    3 Results
  • Control Panel (lde7314acm & Ldg7314aam) (lde7314acm) (ldg7314aam)
    3 Results
  • Cabinet-front (lde7314ace) (lde7314acl) (lde7314ade) (ldg7314aae) (ldg7314aal)
    3 Results
  • Cabinet-front (lde7314acm & Ldg7314aam) (lde7314acm) (ldg7314aam)
    3 Results
  • Door (lde7314ace) (lde7314acl) (lde7314ade) (ldg7314aae) (ldg7314aal)
    3 Results
  • Door (lde7314acm & Ldg7314aam) (lde7314acm) (ldg7314aam)
    3 Results
  • Cabinet-rear (lde7314ace) (lde7314acl) (lde7314ade) (ldg7314aae) (ldg7314aal)
    3 Results
  • Cabinet-rear (lde7314acm & Ldg7314aam) (lde7314acm) (ldg7314aam)
    3 Results
  • Tumbler (lde7314ace) (lde7314acl) (lde7314ade) (ldg7314aae) (ldg7314aal)
    3 Results
  • Tumbler (lde7314acm & Ldg7314aam) (lde7314acm) (ldg7314aam)
    3 Results
  • Heater (lde7314ace) (lde7314acl) (lde7314ade) (lde7314acm)
    3 Results
  • Gas Valve (ldg7314aae) (ldg7314aal) (ldg7314aam)
    3 Results
  • Motor Drive (lde7314ace) (lde7314acl) (lde7314ade) (ldg7314aae) (ldg7314aal)
    3 Results
  • Motor Drive (lde7314acm & Ldg7314aam) (lde7314acm) (ldg7314aam)
    3 Results
  • Ducting (lde7314acm) (ldg7314aam)
    3 Results
  • Wiring Information-ldg7314aa* (ldg7314aae) (ldg7314aal) (ldg7314aam)
    3 Results
  • Wiring Information-lde7314ac* (lde7314ace) (lde7314acl) (lde7314acm)
    3 Results
  • Wiring Information-lde7314ade (lde7314ade)
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Timer switch replacement on maytag dryer

A:

Thank you for your question and I understand your concern.

If the dryer will start and run; it's not likely a timer issue. If the dryer has to sit and cool down before it can be restarted; I suspect the motor overheating and shutting off on the internal thermal motor protector. Take a look at the motor to see if might be covered in a layer of lint. You may be able to access and clean the motor from the rear by removing the small panel in the rear corner. If not, the front panel will need to be removed.

The front panel can be removed by taking the screws out from the front bottom edge of the panel. Swing the bottom out to about a 30 degree angle and the pull it downwards. NOTE: Disconnect the power cord from the power source before removing the front panel.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
June 05, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show