Model #LCX-151 Aiwa tabletop systems

  • Cabinet Parts
    3 Results

Question and Answers

Q:

Belt for an old drill press. Model: 113.21371 11321371 Craftsman Craftsman 15-1

A:

Thank you for your question.

I will be happy to assist you. I looked up the model number you submitted. The part number for the drive belt is 71138. I looked up the part on our website and it shows this part number is a knob. I think when the information was being put in the wrong information was submitted. I posted the information for the belt that I have below. Just click on the image to enlarge it. If you order the part from the following link, I suspect you will receive the correct belt. Craftsman tractor parts

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 07, 2012
A:

David ,

I posted a direct link to the part below. The description of the part is a knob but as I mentioned before I think the description is wrong. Another option you have it to purchase the belt locally. Just remove the belt and take it to your local auto parts store. Napa would be the best. They should have a belt-measuring tool to measure the old belt.

Please let me know if you need further assistance.

Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
December 11, 2012
See more answers
Q:

how can I get a new belt for Model-11321370 11321370 Craftsman Crafts 15-1/2 inch drill press

A:

Thank you for your question.

 

 

I am sorry you are having a problem finding the belt. I will be happy to assist you. I looked up the model number you submitted. According to the parts list, the correct belt for your drill press is part number 1745. If you would like to order the belt, you can do so from the following link. Replacement drive belt for a Craftsman drill press model 11321370.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

Mark

Read More
Mark T -
Sears Technician
October 08, 2013
Q:

model number 911.99003991 sel-clean thinks door is locked. it is not. when door closed get clicking sound like latch frozehow to reset part 151 latch assembly?

A:

There is not really a reset routine that you can use to free up the oven door lock mechanism and clear this message. You will likely need to replace the door lock assembly (part WB15T10018). The operation of the door lock assembly is shown in the image below. Unless the door latch assembly is jammed and can be freed up so that it will operate properly, you will need to replace it. The procedure for accessing this component and additional technical information is shown in the image below. Be sure that you unplug the range to disconnect electrical power before accessing internal components. Using the information below, you may be able to fix this problem yourself. If you need more help, resubmit your question with additional details.

If you need parts, you can order them from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 07, 2010