Model #KUDW02FRSS0 Kitchenaid dishwasher

  • Door & Panel
    3 Results
  • Control Panel
    3 Results
  • Door & Latch
    3 Results
  • Lower Washarm & Strainer
    3 Results
  • Heater
    3 Results
  • Fill & Overfill
    3 Results
  • Tub & Frame
    3 Results
  • Pump & Motor
    3 Results
  • Upper Rack & Track
    3 Results
  • Third Level Rack & Track
    3 Results
  • Upper Wash & Rinse
    3 Results
  • Lower Rack
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Frigidaire KUDW02DFRSS0 Diswasher blows Bimetal fuse twice. KUDW02FRSS0 Kitchenaid Dishwasher

A:

Hello Dave. I am sorry to hear about this problem that you are having with your dishwasher.

 

I recommend that you shut off the house circuit breaker for the dishwasher and check the wiring from the junction box to the door switch. Also check the wiring from the door switch to the electronic control board. You may find a short to a metal ground in that wiring. That could cause the problems that you are describing.

 

If you find no problems with the wiring, then you can check the resistance of all of the loads on that control board (with power to the dishwasher still shut off). If you find no problems with the major components such as the motor and the heater, then you may need to replace the electronic control board.

 

If you need more help, reply with additional details and we will assist you further. 

Read More
Lyle W -
Sears Technician
October 28, 2013
A:

Thanks for posting that additional information Dave. I hope that you find the cause of this problem. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
October 29, 2013
See more answers

Recommended maintenance parts & accessories

Show 3 more
No more item to show