Model #KUDK02CRBS1 Kitchenaid dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm And Strainer Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts, Optional Parts (not Included)
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

KitchenAide Dishwasher need help defining problem

A:

Hi Cristy,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your dishwasher.

Most likely you have a heating issue. The clean light indicates a no heat situation. I am including an image below that will describe this. The image also contains the Service Diagnostics Cycle. Run the diagnostics and this may clear the control of this error.

This error can also be caused by a bad door switch. The remaining checks will require the use of an ohm/volt meter. If you have a meter and are confident in your ability to safely perform these checks, reply to this post and I will be happy to assist you in any way I can.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please perform the diagnostic tests detailed here and report back with your findings. I am looking forward to assisting you again in the near future.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
June 24, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show