Model #KUDI24SEBL1 Kitchenaid dishwasher

  • Door And Panel
    3 Results
  • Control Panel
    3 Results
  • Door And Latch
    3 Results
  • Lower Washarm And Strainer
    3 Results
  • Heater
    3 Results
  • Fill And Overfill
    3 Results
  • Upper Wash And Rinse
    3 Results
  • Tub And Frame
    3 Results
  • Pump And Motor
    3 Results
  • Upper Rack And Track
    3 Results
  • Lower Rack
    3 Results
  • Miscellaneous
    3 Results


Error Codes

Error Code:



Question and Answers


I have a Kitchen Aid D/W M#KUDI24SEBL1, S#FF2207414 that needs part #4172127 which is a lower door seal that needs replacing


Hi Lynette,

Thank you for submitting a question to Manage My Life.

The door seal along the bottom of the door should just pull off the door. Then the new seal pushes onto the bottom of the door. To replace the two other parts that come with the door seal kit you have to remove the whole door from the dishwasher. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. I have provided you with the instruction sheet below. I recommend having an extra pair of hands to hold the door so that the wires in the door are not stretched. After you have replaced the spacers make sure to bend the tabs back to secure the door. If they are not bent back, the door could come off.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.


Read More
Landell -
Sears Technician
November 20, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show