Model #KEH-1900 Pioneer radio automotive

  • No Image Available - Fidelitone
    3 Results

Question and Answers


I have a GE GSD 1900 Series dish washer that doesn't drain the water every time I use it


Thank you for your question.

I can understand your concern for the dishwasher not draining properly all the time.

  • In the bottom inside of the dishwasher there is a grill that has a check valve assembly under it that could be causing the problem.

  • Remove the two screws that holds the cover in place and locate the valve body and nut check valve.

  • Unscrew the nut on the valve body and remove the check valve a look for debris in the valve body.

  • Once cleaned return the check valve and nut back into the valve body and reinstall the grill cover.

  • The other possible location is where the drain hose attaches to the valve body from underneath the dishwasher.

  • You will need to remove power to the dishwasher and remove the lower kick plate and access panel to get to the drain hose check valve on the side of the valve body.

  • Make sure that you have some towels to catch the water when you remove the drain hose.

  • Then unscrew the valve check assembly and examine the rubber check flapper for and debris or curled condition which would prevent the diswasher from draining properly.

  • Replace any damaged or worn parts and re-install.

I have included some pictures of the valve.

I hope this information will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
October 25, 2010

kenmore front load dryer stops after about 5 seconds


The code that you may be seeing is the tE2 which indicates that the control detects a closed (shorted or defective) thermistor (temperature sensor). I provided testing information and access procedures for that problem in the images below. This information may help you check that thermistor yourself. If it is bad, you can order a replacement part from the Sears PartsDirect website.

Be sure that you unplug the dryer before accessing internal components.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
July 13, 2011

Failed to Open Serial Port? what do I do?


Thank you for your question on the RW 19000.

Do you have the 93300 customizer program for 19010 ergo3, to link to your computer?

I am not sure why your new computer will not recognize your serial port on the RW 93200 but it does sound like a compatibility problem or you may have to do some different settings on the computer.

You might want to call 1-800-637-0183 customer support line to see if they can help you with this problem.

Please let me know if they have helped you and tell me what happened.

Sam A.

Read More
Sam A -
Sears Technician
August 13, 2011