Model #KEBC208KSS02 Kitchenaid built-in oven, electric

  • Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Oven Door Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Top Venting Parts, Optional Parts
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Broken cleaning Cycle, No lights KEBC208KSS02 Kitchenaid Built-in oven - electric

A:

Thank you for your question and I understand your concern.

The upper oven shut down thermal may have tripped causing the upper oven to quit heating. The oven will have to be removed and the back panel taken off to access the oven shut down thermal fuse.

The oven cavity lights have likely quit working because of a faulty light transformer or a faulty electronic oven control board. I strongly suggest calling a service technician with the proper tools and equipment to properly diagnose and repair your range. 

I added three images below intended for the technician reference the wiring circuit and testing procedures.

 If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

 

 

Read More
Joey S -
Sears Technician
May 23, 2013
A:

Karl; In order to provide any model specific information, I will need to know the model number of range/oven. If you have the same Kitchenaid wall oven model as shown in the original question at the top of this thread, the oven has an oven shut down thermal fuse for the upper oven and lower oven. So, if one blows, the other oven will still operate. See images of the wiring diagram I posted if you have this same model, otherwise I will need to know the model number of your range/oven in order to provide any model specific information.

Read More
Joey S -
Sears Technician
October 17, 2013
See more answers
Q:

How can I correct the temperature for my Kitchen Aid oven?

A:

Hello Will. The specific directions for adjusting that offset on your model of KitchenAid oven (KEBS277YAL-4) is shown in the image below. To lower the offset (or zero it out), follow the directions shown below. Press and hold the BAKE button until it goes up past 35 degrees then the offset will return to zero. You can then lower the offset by pressing the BAKE button. Don't forget to press the Start/Enter button to enter and save the adjustment. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
November 17, 2011
A:

We are glad to hear that the procedure worked. Thanks for letting us know how this turned out.

Read More
Lyle W -
Sears Technician
December 06, 2011
See more answers
Q:

My oven is louder now when it is on.

A:

Thank you for your question.

I can understand your concern with the oven making more noise than it did before.

Yes, it is possible that the circulation fan may be going bad and causing more noise that normal.

Both ovens have these fans so do you notice when using the other oven if the noise is not as loud?

Since this oven also has a convection fan for convection cooking in the back wall of the oven cavity is this the fan that is making noise?

If it is it will have to be replaced.

If you could clarify which fan you think is making the noise I will be glad to help you further.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 08, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show