Model #KD-32FS130 Sony direct view\digital 27" to 40" tv

  • Cabinet Parts
    3 Results

Question and Answers


kenmore elite front load model kd 110 45872 400


Thank you for submitting a question to Manage My Life.

This issue can be caused by overloading or an incomplete drain. If the washer is empty and already drained, you can unplug the power cord and access the pump clean-out filter as shown in the image below. Place a shallow pan below that pump to collect residual water before removing that filter. You may find debris or lint in this area that is preventing the washer from draining completely. Also make sure the drain hose is not more than 6 inches into the stand pipe and has an air gap.

The next thing I recommend is checking for error codes. This washer has a way to recall error codes. If the control detects a problem it will identify it with an error code. I am including this information in a set of images below. These error codes are important to ensure proper diagnosis of your appliance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

Please perform the diagnostic tests detailed here and report back with your findings. Be sure to record any failures and when they occur along with any error codes that are displayed.


Read More
Landell -
Sears Technician
January 31, 2012

I have a KD Tools 4 piece micrometer set, #3734 from up to 1", 1-2", 2-3" and 3-4". I need an owners manual so I can get instruction on how to use these.


Thank you for your request for a manual for the micrometer.

I have e-mailed you the manual.

Sam A.

Read More
Sam A -
Sears Technician
April 18, 2012