Model #KAC-626 Kenwood amplifier

  • No Image Available - Wards
    3 Results

Question and Answers

Q:

What are the normal noises for a new washer to make the first time it runs. It sounds like something is rubbing in the motor.

A:

You could have a piece of shipping material that is still in the washer. Here is a link for the installation guide: Installation Instructions . Make sure that you removed that shipping base that is shown in STEP 2 on page 5 of that manual. If not, this could be causing a rubbing sound when the motor is running.

Check all of the installation instructions shown in that guide.

The washer will make a humming noise when the motor is running. The motor will be rotating a drive belt. If the noise is obviously abnormal and you followed all of the steps in the installation guide, then you will likely need to have the washer examined by a service technician. There is a chance that you have a problem with the motor or the cover that protects the motor. You can call Sears at 1-800-469-4663 (1-800-4MY-HOME) for warranty service.

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011
Q:

RM 626 old arines riding lawn mower

A:

Thank you for your question on the old Tecumseh engine.

I think I have found you the magneto you are looking for on the link below.

Magneto for Tecumseh engine V60-70359J .

I hope this is what you are looking for and that this company actually has the part.

Sam A.

Read More
Sam A -
Sears Technician
April 13, 2012
Q:

How do I install Kenmore Model 665 626 19200 grill on my microwave

A:

There are two screws that secure the grill on the very top of the microwave. They are about 6" in from each side. Remove those screws and then you should be able to snap the old grill out and off of the microwave. Snap the new grill in place and install the screws.

Read More
Lyle W -
Sears Technician
August 05, 2010