Model #JVM1340AW02 Ge microwave/hood combo

  • Case, Door & Controls
    3 Results
  • Base, Stirrer & Electronics
    3 Results

Question and Answers

Q:

how to install door handle wb15x336

A:

To install a new door handle, the door will have to be removed from the microwave and taken apart. When this type repair is done there is a possibility of microwave leak around the door. A leak test should be performed on the microwave after the repair is made.

To replace the door handle remove the screws from either the upper or lower hinge and remove the door from the microwave.

Place the door face down on a flat surface on a pad. With a small flatblade screwdriver or a putty knife pry the inner trim off the door. Pry a small distance at a time and work your way around the door until the inner trim comes free.

With the trim removed you can access the screws that hold the handle on.

Read More
Jimmy K -
Sears Technician
June 24, 2010

Top Parts