Model #JGS9900BDS Jenn-air slide-in range, gas

  • Control Panel/top Assembly
    3 Results
  • Gas Controls/surface Burners
    3 Results
  • Gas Controls/oven
    3 Results
  • Door/access Panel (ser Pre 10)
    3 Results
  • Door/access Panel (ser Pre 11)
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
  • Blower Assembly (plenum)
    3 Results

Question and Answers

Q:

Can I get a picture of your clearance Jenn air slide in range model JGS9900BDS?

A:

I added the image and specifications of the Jenn-Air slide in range below. This is the only picture that I could find.

Read More
Joey S -
Sears Technician
November 27, 2009
Q:

Have Jenn Aire jgs9900bds stove with no buttons on front working or stove working. Need control board or Panel Please Help. Thanks

A:

First, make the wall receptacle has power. Plug some other electrical appliance into the outlet to confirm the outlet works. If the outlet works the range could possibly be in an "Energy Saver Mode" See image below for instructions. If it's not in an Energy Saver Mode then the HI-LIMIT switch may have failed causing the control panel to go blank. The Hi-limit should be tested first for continuity. NOTE: Disconnect the power supply from the range before servicing. The range will have to be pulled out and the top of the range must be removed in order to access the HI-LIMIT switch. The control board must have 110-120 volts supplied when measured across the white and black wires. I have a red circle drawn around the connector. I also have traced out the power supply circuit to the control board in black and green colors. NOTE: I do not recommend checking voltages unless you have experience and feel safe and confident otherwise I recommend calling a service technician to diagnose and repair your range.

In order to diagnose the failure will require testing and verifying the voltage supply to the electronic oven control and once the proper voltage has been verified then the touch panel operation will have to be tested using an ohm meter.

I added the information needed in the image below. I strongly recommend calling a service technician to diagnose and repair your range.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 12, 2010
Q:

I need a new glass cook top on my jenn-air slide In gas range - model # jgs9900bds . How do I take the old top off and replace it with a new one.

A:

Thank you for your question and I understand your concern.

The link below will provide the only instructions available.

Changing glass top on gas stove

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
November 19, 2012