Model #JES9800AAS Jenn-air slide-in range, electric

  • Wiring Information
    3 Results
  • Blower Assembly (plenum)
    3 Results
  • Control Panel/top Assembly
    3 Results
  • Body
    3 Results
  • Oven/base
    3 Results
  • Door/access Panel (stl)
    3 Results

Question and Answers

Q:

JES9800aas - how do you take off the glass top and replace with new one. My existing one is broken.

A:

I posted a procedure for removing and replacing that glass panel in the image below. Be sure that you shut off the house circuit breakers for the range before beginning that procedure.

This information should help you complete that repair. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
October 29, 2012
A:

There is not a video for that repair that I am aware of. You should have found screws on the side of the main top assembly. There should also be screws under the front control panel. You will need to lift the top off of the range before you can get to the element mounting brackets under the glass cooktop. I recommend that you refer to the parts list diagram. That may help you see the components and the fasteners that secure that main top to the frame of the range.

Read More
Lyle W -
Sears Technician
November 07, 2012
See more answers
Q:

replacing stove dual infinite switch on Jenn Aire jes9800aas

A:

That infinite switch should have come with the instruction sheet that is shown in the first image below. I provided a wiring schematic and a wiring diagram for your range in the second and third images. Those diagrams should reflect the original wiring connections on your infinite switch. The 4th image shows how to access that switch. That information may help you wire up that replacement switch. If you need more help, reply with additional details (which dual burner switch you are replacing and the markings on the original switch).

If you get to the point where you need to have a service technician install that new switch, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 26, 2012
A:

Here is the 4th image. Be sure that you shut off the house circuit breakers for the range before accessing internal components.

Read More
Lyle W -
Sears Technician
March 26, 2012
See more answers

Recommended maintenance parts & accessories

Show 3 more
No more item to show