Model #IC4Q-IC4Q-ASSMBLY Amana ice maker kits

  • 8 Cube Ice Maker-assembly D7824702 (ic2/ic2-assembly) (ic3q/ic3q-assmbly) (ic4q/ic4q-assmbly) (ic4r/ic4r-assmbly) (ic6/ic6-assembly)
    3 Results
  • Add-on Ice Maker Assembly (ic2/p3647509w)
    3 Results
  • Add-on Ice Maker Assembly (ic2/p3641510w)
    3 Results
  • Add-on Ice Maker Assembly (ic3q/p1110702w)
    3 Results
  • Add-on Ice Maker Assembly (ic3q/p1110703w)
    3 Results
  • Add-on Ice Maker Assembly (ic4q/p1110802w)
    3 Results
  • Add-on Ice Maker Assembly For Side By Sides (ic4r/p1170101w)
    3 Results
  • Add-on Ice Maker Assembly For Side By Sides (ic4r/p1170102w)
    3 Results
  • Add-on Ice Maker Assembly For R Models (ic6/p1165801w)
    3 Results
  • Add-on Ice Maker Assembly For R Models (ic6/p1165803w)
    3 Results

Question and Answers

Q:

I have kenmore sewing machine mod. 385.15212/15218

A:

We don't have instructions for replacing the needle bar. This job requires special tools and training and after the replacement the timing of the machine will have to be reset.

I recommend you take the sewing machine to a Sears Parts and Service Center or a Sears Retail Store for repair.

Read More
Jimmy K -
Sears Technician
April 30, 2010
Q:

I have a Craftsman lawn mower model # 917.377151 with a starter that wont retract thoe rope and then of course wont start.

A:

Thank you for your question.

I am sorry you are having a problem with the mower. It is best to order the whole recoil assembly. The reason I recommend replacing the whole assembly is because it come completely assembled and you do not have to mess with the spring. The spring can accidently come out and cause injury. The recoil comes with small bolts and nuts to attach it to the housing. So all you have to do is remove the blower housing from the mower. Then drill out the rivets securing the old recoil. Position the new recoil and secure with the hardware provided. The part number for the recoil is 497680 and can be ordered from our parts website: Sears Parts Direct .

I hope this is helpful. If you need further assistance, please feel free to reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 24, 2011
Q:

my kenmore washing machine model #41743042200 broke. repair person said it was the computer. called sears, they think it may be a controller assmbly?? help

A:

The only "computer" in this washer is the speed control board (replacement part number 134149220) which is shown in the image below. If the repair person properly tested the washer and is certain that this is the failed component, you can order a new speed control board from the Sears PartsDirect website.

The procedure for replacing the speed control board is shown in the image below. Be sure that you unplug the washer to disconnect electrical power before accessing internal components. Internal metal edges in the washer can be sharp. Protective gloves are recommended.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 26, 2010