Model #HR3-3A Amana air-conditioner/heat pump(outside unit)

  • Replacement Parts
    3 Results

Question and Answers

Q:

my hr3 is flshing f01 why?

A:

Hi Carla,

Thank you for submitting a question to Manage My Life.

Without your model number I am only able to give you general information. I will assume this is a Kenmore HE3 washer.

The F01 fault code is indicating an EEPROM error or a PUMP DRIVER error. A communication error between the Central Control Unit (CCU) and the EEPROM on board the CCU occurred. Possible causes of an EEPROM error: A power glitch may have caused this error. Unplug the power cord for 3 minutes then reconnect power. Possible causes of a PUMP DRIVE error: The pump driver fails to activate. Replace the CCU. Most likely the CCU board will need to be replaced.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

If you would like specific help with your washer, please reply to this post with the model number and more details.

Landell

Read More
Landell -
Sears Technician
November 21, 2011
Q:

My Craftsman scroll saw needs a 3A 125V fuse, all I can find is a 3A 250V. Can I use it?

A:

Substituting a 250 volt fuse for a125 volt fuse is fine. The voltage doesn't matter as long as the amperage is correct.

Read More
Jimmy K -
Sears Technician
September 08, 2008
Q:

How do i take off the clutch on my weedwacker? #30 on this image: http://beta.searspartsdirect.com/partsdirect/partsdirect/showSubComp.pd?imageUrl=http%3a%2f%2f

A:

The Sears Parts Direct address did not open with image or model number. Without knowing the model number I will only be able to provide general information and instructions. I found some previous answers in the links below that may apply to your specific model.

How do I remove the clutch drum assembly from my Craftsman weedwacker?

I have a Craftsman Weed wacker model no. 358.745501. I need to find out how to remove the clutch.

how do i replace the clutch on my sears weedwacker model # 358.796121?

Read More
Joey S -
Sears Technician
July 07, 2010