Model #HR3 Jvc vcr

  • No Image Available - Fidelitone
    3 Results

Question and Answers

Q:

my hr3 is flshing f01 why?

A:

Hi Carla,

Thank you for submitting a question to Manage My Life.

Without your model number I am only able to give you general information. I will assume this is a Kenmore HE3 washer.

The F01 fault code is indicating an EEPROM error or a PUMP DRIVER error. A communication error between the Central Control Unit (CCU) and the EEPROM on board the CCU occurred. Possible causes of an EEPROM error: A power glitch may have caused this error. Unplug the power cord for 3 minutes then reconnect power. Possible causes of a PUMP DRIVE error: The pump driver fails to activate. Replace the CCU. Most likely the CCU board will need to be replaced.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

If you would like specific help with your washer, please reply to this post with the model number and more details.

Landell

Read More
Landell -
Sears Technician
November 21, 2011