Model #HL-10PS Brother computer/printer

  • Front Cover
    3 Results
  • Upper Cover
    3 Results
  • Side Cover
    3 Results
  • Rear Cover
    3 Results
  • Chassis
    3 Results
  • Transfer Unit
    3 Results
  • Feeder Guide Unit
    3 Results
  • Feeder Unit
    3 Results
  • Single Cassette
    3 Results
  • Scanner Unit
    3 Results
  • Fixing Unit
    3 Results
  • Control Panel
    3 Results
  • Harnesses
    3 Results

Question and Answers

Q:

How to replace nozzle on Heat gun

A:

Thank you for your question and I understand your concern.

We do not have any technical information or a service manual for you heat gun. It appears by looking at an image of it, remove all exposed screws in order to separate the housing apart. Once the housing has been separated, you should be able to see how the nozzle is attached and how it would come off.

I added a PDF file of an Owner's Manual that will likely apply to your model which shows screws securing the two halve of the case together. It looks like all the Steinel models basically come apart the same way. Take the screws out and pry the two halves apart to access the nozzle. 

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
August 27, 2013
Q:

failure codes

A:

As Alina pointed out, having a model number would help us more accurately decipher the error codes that you are seeing on the washer. The dl error code often pertains to the door lock assembly. The hl can indicate a problem with the temperature sensor on certain washers.

I recommend that you reply with the full model number of your dishwasher. Once we receive additional information, we will gladly provide troubleshooting and repair information.

Read More
Lyle W -
Sears Technician
January 28, 2011