Model #HCM-1000 Honeywell humidifier

  • Humidifier
    3 Results

Question and Answers

Q:

safety switch on lt 1000

A:

Thank you for your question.

Your Tractor uses an Operator Presence (seat) switch that will cause engine to stall if blades are engaged or the brake is released without anyone on the seat. If ample amount of weight is not kept on the seat during operation or the operator is leaning forward the tractor will stall because the Operator Presence (seat) switch senses that the operator is not completely on the seat.

To check Operator Presence (seat) switch:

  1. Lift seat.
  2. Locate wires that connect to Operator Presence (seat) switch under the seat.
  3. Disconnect and clean any debris in the switch connector. Use an ohmmeter to check the switch. When the switch is not pushed, the reading should be 0 ohms (closed). When pushed it should read ol ( open load )
  4. Make sure the connector is fully seated on the seat switch. The connector is a special connector that will short the two wires if it is not fully seated.

I hope this is helpful.

Please click on the following link to order the parts you need. Sears Parts Direct

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please let me know if you need further assistance.

Thank you for using Mange my life.

Mark T.

Read More
Mark T -
Sears Technician
April 12, 2011
Q:

LT 1000 model #917272922

A:

Thank you for your question.

I will be happy to help you with your question. First, park the tractor on a level surface. Then follow the instructions in the two images below. Click on the image to enlarge them if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 31, 2011
A:

Thank you for your question.

I will be happy to help you with your question. First, park the tractor on a level surface. Then follow the instructions in the two images below. Click on the image to enlarge them if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 31, 2011
A:

Hello Vicky. That part number 151141 is for the left hand lift link assembly that is shown in the image below. What part have you been receiving? There may be a problem with the wrong part being picked from the bin location at the parts distribution center. Let us know the part that you have been receiving and we will try to help you resolve this problem.

Read More
Lyle W -
Sears Technician
July 05, 2012
A:

Thanks for letting us know about this problem Vicky. I have forwarded that information to the Sears PartsDirect division so that they can try to fix that problem. I apologize for the problems that you had in obtaining that part. I am glad to hear that you found a source for that part. Let us know if you need more help.

Read More
Lyle W -
Sears Technician
July 09, 2012
See more answers
Q:

LT 1000 Lawn Tractor

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. I have looked up the model number you have submitted. There is no indication the mower was sold with a high altitude kit. It is possible it was installed after. The problem could be a partly plugged. I recommend cleaning the main jet first. Click on this link to be taken to a site to aid in accessing the main jet. Please be sure to work in a well ventilated area and use caution when working with gasoline.

If this does not help I recommend replacing the main jet. Here is a link to order any parts you need. Sears Parts Direct .

If you need further assistance please reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 18, 2011