Model #GSD6900N10WW Ge dishwasher

  • Escutcheon & Door Assembly
    3 Results
  • Body Parts
    3 Results
  • Upper Rack Asssembly
    3 Results
  • Lower Rack Assembly
    3 Results
  • Motor-pump Mechanism
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I install a Rinse Module on a GE Dishwasher?

A:

Hi Sandy,

Thank you for submitting a question to Manage My Life.

The door panel must be removed to access the detergent/rinse module. The door components are accessible by removing 3 Phillips screws from each side of inner door and 2 T20 Torx screws from the bottom of the door. Carefully separate the inner door panel from the outer door panel. The rinse module can then be removed from the inside of the inner door panel. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
January 23, 2012