Model #GGW9200LW2 Whirlpool residential dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8318276 Burner Assembly
    3 Results
  • Door Parts
    3 Results
  • Pedestal Parts (not Included), Optional Parts (not Inc
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My Whirlpool dryer will not heat up to dry my clothes.

A:

Hi Jim,

Thank you for submitting a question to Manage My Life.

The first thing I recommend is checking for error codes. This dryer has a test routine you can run that will help in the diagnosis of any problems the control detects. If the control detects a problem it will identify it with an error code. I am including this information in a set of images below.

The next thing you can do is test # 3 Heater Test. There are several portions of this test detailed in the tech sheet I have provided you. Some of these tests will require a multimeter. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or for parts purchases; Sears Parts Direct .

Please perform the diagnostic tests detailed here and report back with your findings. Be sure to record any failures and when they occur along with any error codes that are displayed.

Landell

Read More
Landell -
Sears Technician
December 21, 2011