Model #GA-0910CC Goldstar air conditioner -room

  • Unit Part Image
    3 Results
  • Replacement Part List-ga-0910cc
    3 Results
  • Unit Part Image
    3 Results
  • Replacement Part List Ga-0950cc
    3 Results

Question and Answers

Q:

Who manufactured my Ted Williams 12 gauge shotgun?

A:

According to the model number, this shotgun was manufactured for Sears by Remington.

Read More
Lyle W -
Sears Technician
April 05, 2010
Q:

My Proform crosswalk 480 has no power. We moved it from NY to GA. It was purchased 01/09. It is hardly used. What could be wrong?

A:

Plug a fan or lamp into the outlet the treadmill is connected at to be sure about the power.

If you want to try to repair the treadmill, disconnect the power to it. Remove the motor hood across the front and inspect the wiring to the switches and the controller board. If the treadmill has not worked since the move, I suspect a wire came loose during shipping.

I am sending you an image that gives the function of the led's on the MC2100 motor controller.

Read More
Jimmy K -
Sears Technician
July 15, 2009
Q:

my 17.5 hp motor on craftsman mower starts missing after about 1 hour of running. There will be no gas in filter bowl, Remove line between motor and filter, ga?

A:

Thank you for submitting a question lets see if we can help. Next time the engine starts to die, loosen the fuel cap for ten seconds. If the engine smoothes out, I recommend replacing the fuel cap. The fuel cap has a vent that should allow air to replace the used fuel. If the vent is plugged, fuel will eventually stop flowing from the tank. The fuel filter and the fuel pump could also cause the same issue.

I have seen some issues with the fuel line running to close to the engine and causing a vapor lock. The heat of the engine will cause problem. To solve this I recommend either rerouting the fuel line or using a zip tie to hold it back from the engine.

I recommend only using a screen type fuel filter if your tractor does not have a fuel pump. The better quality filters will restrict the flow on gravity feed system.

If the fuel is not the problem, you have to determine if the engine has spark. To check the engine for spark remove the spark plug wire and insert a screwdriver into the boot. Make sure to hold the handle of the screwdriver and position the exposed metal portion of the screwdriver close to something metal on the engine. A bolt head will work well. Then try to start the engine. You should see spark from the screwdriver to the bolt head. This mean the coil is good. If you do not see a spark most likely the coil need to be replaced. I hope this is helpful. If you need further assistance, please submit more details.

Thank you for using Manage my life.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Mark T -
Sears Technician
August 22, 2010