Model #FS-X3 Jvc tabletop systems

  • Cabinet Parts
    3 Results
  • Speaker
    3 Results

Question and Answers

Q:

Fireplace model FS 1510A

A:

Thank you for your question on the safety of the use fire place.

You may want to have your local fire marshal look at the fireplace to see if it is safe to use as it is installed.

It may require some fire place shields or other recommendations to make sure it is safe to use.

Some areas have fires codes on the use of fireplaces.

I would rather you be safe that have something bad happen.

Sam A.

Read More
Sam A -
Sears Technician
December 07, 2012
Q:

What do letters FS mean when I try to turn on the oven?

A:

The display is likely displaying the F5 (five) error code. This could mean that you have a stuck key on the keypad on some models of Kenmore electric ranges. On others, it indicates that you have a bad electronic oven control board. You can try unplugging the range to completely disconnect electrical power. Leave it unplugged for 5 minutes and then plug it back in. This may clear the code. If not, then the control board or key pad may need to be replaced.

Without a specific model number for your Kenmore range, it is impossible to provide you with an exact answer.

I recommend that you reply with the full model number of your Kenmore electric range. We will provide more specific information and troubleshooting for this problem once you provide this additional information.

Read More
Lyle W -
Sears Technician
October 13, 2010
Q:

What is a Craftsman lawn tractor model 917271141 engine output shaft size? It has a Kohler CV16.5S-43527 engine. Hoping it's a 1"X3 5/32" straight shaft.

A:

Thank you for your question.

I have checked on the specifications for your engine. The shaft is 1 inch with a 1/4 inch keyway. The problem I am having is the length of the shaft. The best I can tell it is about 3 inches. I have provided you with the spec sheet below. I hope this is helpful.

Please reply below if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 14, 2010