Model #FRY BABY 1 Presto kitchen equipment

  • Replacement Parts
    3 Results

Question and Answers

Q:

They don't make baby detergent in HE so what should I do?

A:

The manufacturer of Dreft doesn't recommend using Dreft in a high efficiency (HE) washing machine. HE machines need low sudsing detergents and if regular detergent is used, the excess suds could lead to washer problems. Unfortunately, just using a smaller amount of regular detergent does not fix the issue. Only the use of a HE detergent ensures the proper performance of your washer.

If you have an HE washing machine, look for 2x Ultra Tide HE Free, which is made without dyes or perfumes.

Read More
Joey S -
Sears Technician
August 18, 2008
Q:

baby room colors

A:

The link provided above shows some rooms with whites and lighter neutral colors (beige). You can also consider a pale yellow or light green on the walls.

Read More
Lyle W -
Sears Technician
March 09, 2011
Q:

Did I fry the oven control board when I shorted the wire to ground when removing the bake element?

A:

The line 2 (L2) voltage supply is connected to the bake and broil element which is always supplied with 120 volts regardless if the oven control is ON or not. I added the wiring diagram in the image below showing Line 2 (L2) connected to one side of both bake and broil elements. You will notice a Bake and a Broil relay which is part of the electronic oven control. When the Bake relay closes it provide Line 1 (L1) to the bake element and it heats. Generally speaking, if the bake element wasn't working before you shorted the element; the bake relay/control board was likely bad and not the bake element. You will need to replace the electronic oven control board now that it is dead. Oven control part# 316131601R. NOTE: Remember to remove power from the range by flipping both breakers OFF or by disconnecting the power cord before replacing the control board.

Read More
Joey S -
Sears Technician
August 24, 2009