Model #FF-65 Suburban furnace floor

  • 65,000 B.t.u. Model No. Ff-65
    3 Results

Question and Answers

Q:

65 in Mitsubishi tv

A:

If the STATUS led is going sold red that indicates a lamp failure. If it has been over a year since you've replaced the lamp that is where I would first put my suspicion to. A tech would be able to get an error code from your TV to get a better indication of what is failing but lamps are common to go out and meant to be replaced by the consumer. Your lamp part number is 915B403001. I included Sears link to it. If you've recently replaced it call for repair service it may require work.

Read More
David A. - Personal Solutions Manager -
Sears Technician
November 12, 2011
Q:

Error code ER FF ?

A:

That model number (795.62600) does not appear to be valid. The part number that you provided (4681JK1004E) is a valid part number. You can probably fix this problem by replacing that freezer fan motor. Kevin correctly pointed out in the above response that this is relatively advanced repair. Here is a link for a previous answer that shows how to remove that evaporator cover in that back of the bottom freezer: There display on my Kenmore Elite Bottom freezer reads ER 1F. Why and how do I fix it? The Ice maker will not work either. That previous answer describes a fix for the ice fan but the procedure for the freezer fan is basically the same. If you replace that freezer fan and have the same problem, you will probably need to replace that control board in the back of the refrigerator. The control board gets a feedback signal from the freezer fan. That feed back signal is difficult to measure or detect. That is why I recommend that you replace that freezer fan.

Be sure that you unplug the refrigerator before accessing internal components.

You can order parts from the Sears PartsDirect website.

If you need more help, reply with additional details and an updated model number.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 24, 2011
A:

That final number on the refrigerator is a revision number. It should not affect the parts information for the freezer fan motor. The freezer fan motor is on the CASE PARTS page. I provided an image of that page below. The freezer fan motor (KEY 404A) is circled in red. Replacing that part may fix your problem. You may also need to replace that control board. Be sure that you UNPLUG the refrigerator before accessing internal components. Let me know if you need more help.

Read More
Lyle W -
Sears Technician
June 25, 2011
See more answers
Q:

display screen reads,"Er FF" what does it mean?

A:

Thank you for your question.

I am sorry that your refrigerator is giving you an error code. It is very inconvenient not to have your refrigerator cooling.

  • The ErFF error code is seeing that there is a problem with the evaporator fan motor or the interconnecting wires from the main control board. Voltage checks have to be made from the board as well as the signal voltage to the motor.

  • I would strongly recommend because of the complexity of the electrical control system in this refrigerator that you have a technician check out the problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

I have included a picture below of the error code from the Technical manual.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
October 13, 2010