Model #FEF450WFWA Frigidaire free standing, electric

  • Cover
    3 Results
  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

how to replace clock on fef450wfwa

A:

The first image below shows how to remove the cover for that cook top light. Unplug the range and remove that top cover. You should then be able to remove the back cover on that console (Key 1 in the second image). Document the location of the wires on the back of that control board (take a digital picture if necessary). You can then remove the wires. Remove the screws from the clock mounting bracket (Key 23). You should then be able to remove and replace that clock control board (Key 20). Make sure that you connect those wires properly to the new control board. Reassemble and test the range.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician replace that control board, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 05, 2012
Q:

Oven Light Won't Shut Off FEF450WFWA Frigidaire Electric range

A:

Thank you for your question and I understand your concern.

The first thing to try is to open the door and locate the door switch plunger in upper right corner of the oven cavity opening. Manually push the plunger in to see if the light will turn off. If the oven door is not shutting all the way, it will not push the door switch plunger in far enough to break the circuit to the oven lamp. 

 Based on the model number provided the image of the range shows to have large oven and small oven. The image also shows that you have two rocker light switches on the control that is used to turn on and off the oven lights when the oven door is closed. The oven door switch also will turn the oven light on when opened and off when closed providing the rocker switch contacts on the control panel is not welded/stuck closed. So, with the said, it could have faulty door switch or it could have a faulty rocker switch on the control panel. In order to diagnose which switch is faulty will require removing the rocker switch(s) and the oven door switch and testing them for continuity in the off and on positions. The two rocker switches can be accessed and disconnect by removing the panel from behind the console. The oven door light plunger switch can also be pried out and disconnected for testing. NOTE: Disconnect the power cord from the power source before removing the back panel and switches.

The two rocker switches on the control panel can be removed by pushing inwards on the two locking tabs on the back of the rocker switches and pushing out on the switch. The oven door switch will need to be pried out using two small flat blade pocket screwdrivers. 

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

Read More
Joey S -
Sears Technician
March 12, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show