Model #ENVELOPE ADAPTER Nec printer

  • Roller Assembly
    3 Results
  • Front Guide
    3 Results

Question and Answers

Q:

Dryer Coupling

A:

Thank you for your question and I understand your concern.

I'm sorry but I'm not aware of any parts referred to as "Dryer Coupling" nor did I find any parts in the parts diagram referring to a (Dryer Coupling).

Barbara H provided a link to the parts diagram of your dryer in the first response. I hope you were able to locate the part you’re looking for by the parts image.

Read More
Joey S -
Sears Technician
May 14, 2011
Q:

Washer coupling

A:

Thank you for your question.

I am sorry you are having a problem with the washer. If the coupler saw not tapped onto the motor or gear shaft all the way, it would cause the motor to bind. If all of the parts of the coupler are not aligned when you reinstall the motor it could also cause the motor to bind. I recommend unplugging the washer and accessing the motor coupler. Both plastic parts of the coupler should be flush with the end of the motor and gear case shaft. If they are fine, go ahead and reinstall the motor. Once it is connected try to turn the motor shaft. If the motor shaft turns, check the electrical connections on the motor and the capacitor. I have bent one of the motor terminals before when connecting the plug. If all, check out ok turn the inside of the pump to make sure it is free. If it is fine, reinstall the pump and the cabinet. Then check the operation. I hope this is helpful. Please let me know if you need further assistance.

I have found a video that shows how to replace the coupler. Click here to watch the video.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 21, 2011
Q:

We are looking for the drive coupling for a Farberware blender.

A:

Thank you for your question.

I can understand wanting a simple replacement part for your Farberware blender.

My normal source for replacement parts does not have that part available.

I am sorry I could not help you with your blender part.

I have found this web-site and if you clip on customer service you can e-mail your request to them.

Farberware .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
May 18, 2011