Model #ELL HANDLES Craftsman ratchet/ nut driver

  • Unit Parts
    3 Results

Question and Answers

Q:

Refrigerator handles

A:

Thank you for your question.

I have looked up the model number you have submitted. I am sorry there are not any other handles available for the refrigerator. If space in an issue we offer counter depth refrigerators. These refrigerators do not stick out as far. I just wanted to let you know this is an option in the future when shopping for a replacement. If you would like to see the counter depth model we sell now, please click here .

Please let me know if you need further assistance.

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
April 22, 2011
Q:

range handles

A:

There is no exact way to determine whether that handle for model 790.9210912 will fit your range model 790.96414408 besides ordering that handle and trying it. The cost of that handle for model 790.9210912 costs around $34 and the screws cost about $4. You can order those parts from the Sears PartsDirect website. The part number for the handle is 316356201. The part number for the screws is 316422204. You will need 2 of those screws. The washers are the same for those models. NOTE: The original screws for that range are about 1/8" longer. That may or may not make a difference when you attempt to install that other door handle. If necessary, you may be able to replace the washers with thinner ones if that handle fits but the screws are slightly shorter than they should be.

We normally don't recommend that you interchange parts from various models in this manner. In this situation, if the thinner handle will fit properly and can be properly secured, then it should be safe to use and will not significantly affect the performance of the range.

I hope that this information helps, reply with additional details if you need more help.

Read More
Lyle W -
Sears Technician
October 18, 2011
A:

I agree that switching those handles does involve a slight risk. If you try to install that tapered handle, I recommend that you use the screws that are designed for that handle.

Read More
Lyle W -
Sears Technician
October 18, 2011
See more answers
Q:

What is the procedure to remove the door handles?

A:

I added an image below. You will need to remove the trim (key#22, 24, 21 &22) in order to access the remaining screws attaching the handle. Pry the trim off starting at the top. Once you remove the trim you can remove the handles.

Read More
Joey S -
Sears Technician
May 07, 2009