Model #EC-1000-B Pec hoist

  • Electrical Drive, Control And Cover Removal
    3 Results
  • Hoist Lift Mechanism
    3 Results

Question and Answers

Q:

craftsman lt 1000 blades 42 in 16.5 hp b&s

A:

Thank you for your question. I am sorry you are having a problem with the tractor. By the symptoms you are having I suspect the problem is the springs for the mandrels are missing or the brake arms are rusted and not snapping back to stop the mandrel when disengaged. With the engine off move, the mandrel brake arm away from the mandrel and let them go. They should snap back. If they do not, you have to determine if it is binding or the spring is broken.

I hope this is helpful. If you need further assistance, please reply below with a model number and more details. Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 16, 2011
Q:

TB 575 ec clutch removal.

A:

Hi Sam,

Thank you for submitting a question to Manage My Life.

I see that you may have already completed this repair. I have already answered a question that may be a duplicate from you. Here is a link to that question; TB 575 EC Weed trimmer starter housing assembly replacement. P/N# 753-05262 . If you need this information here it is. If not, thank you for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
May 08, 2012
Q:

Kenmore Induction Cooker 405.09000 error code EC

A:

I did not find information on a Kenmore Induction Cooker with that model number 405.09000. That EC code may indicate that the burner does not detect a magnetic pot or pan. It could also indicate a control failure or component problem. If that is a valid model number then there may not be serviceable part for the cooker. If you recheck that model number and find additional numbers, I recommend that you reply with that revised information. We will try to assist you further once we receive more information.

You may also want to send us a digital picture of the induction cooker. That may help us determine the type that you have.

Read More
Lyle W -
Sears Technician
May 22, 2012
A:

Thanks for adding that link. I searched further but did not find information on that EC code. I will need to contact the manufacturer. I will update this thread once I receive a reply.

Read More
Lyle W -
Sears Technician
May 23, 2012
A:

I contacted the manufacturer. They are trying to get me a copy of the owner's manual and the technical information on that induction cooker. I have not received that information yet. I hope to receive it soon.

Read More
Lyle W -
Sears Technician
June 05, 2012
See more answers