Model #EAGER BEAVER 2.1 600132-02 Mcculloch chainsaw, electric

  • General Assembly
    3 Results
  • Chain Brake Assemblies
    3 Results
  • Carburetor Assembly
    3 Results
  • Power Head Assembly
    3 Results
  • Handle Assemblies
    3 Results

Question and Answers

Q:

How to remove clutch to get head cover off to replace rope?

A:

I posted some tips on the original question that you asked regarding this problem. Here is a link for that thread: eager beaver 28cc...how to get to starter rope. How to take cable shaft/pulley off of head to get cover off

 

If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
May 01, 2013
Q:

eager beaver 28cc...how to get to starter rope. How to take cable shaft/pulley off of head to get cover off

A:

There are several different types of the Eager Beaver 28cc trimmers. Without the model number, we cannot see the type that you have. That trimmer is manufactured by McCulloch. You can probably access and view a parts list diagram on the McCulloch website.  Here is a link for that website: McCulloch.com

 

You are probably to the point where you need to remove the clutch. You may see a small Torx head screw in the center of the clutch drum. Remove that screw and slide the clutch drum off. If the engine shaft turns when you are removing the screw, remove the spark plug and fill the cylinder with small clean rope. The rope will jam the piston and stop the engine from turning.

 

 

Remove the screws holding the fan housing to the engine and remove the fan housing. The rope and the starter pulley are inside the fan housing.

 

 

Be very careful removing the starter pulley and spring. The spring will unwind violently if it is released.

 

I hope that this information helps. If you need more assistance, reply with additional details and the model number of your trimmer. 

Read More
Lyle W -
Sears Technician
May 01, 2013
Q:

old Craftsman 2.1 chainsaw

A:

Thank you for your question on the bar and chain combination. Oregon chain has a combination that should work for you.

Oregon 14 inch bar and chain combination for model 358.35084 .

I have posted a picture of this below.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
July 24, 2012