Model #E-705 Cerwin-vega speakers

  • Speaker
    3 Results

Question and Answers

Q:

want to attach a 42inch craftsman bagger # 917.249791 to a 54inch craftsman tracto # 917.289900 I believe the diameter of the plastic tubes are the same

A:

Thank you for your question.I will be happy to assist you. I looked up the model numbers you submitted. The bagger will not work on your tractor. The mount is different and the lower chute will not match your deck. The correct bagger for your tractor is stock number 24917. The bagger can be ordered from the following link. Craftsman bagger model number 24917.  I hope this is helpful. Please reply below if you need further assistance.      Thank you for using Manage my life.Mark T.

Read More
Mark T -
Sears Technician
April 16, 2013
A:

evangelista, I do not think the bagger will work on the mower you are looking at buying. The reason is Murray only made a few mowers for Sears. The mowers they did make had a 43 inch mowing deck. The discharge opening on these mowers have a different opening than the 42 inch decks. If the bagger model number starts with 502 it may work. If it starts with 917. It will not fit. I hope this is helpful. Thank you for using Manage my life.

Read More
Mark T -
Sears Technician
June 25, 2013
See more answers
Q:

Pro-Form 705 treadmill ground wire problem

A:

Thank you for your question.

I am sorry you are having a problem with the ground wire on the console. It looks like this ground wire is the ground for just the console and should be connected. If the ground wire for the console was not visible, I recommend opening the console to see if it was just not routed through the hole. If you find the wire route it correctly through the hole and reassemble. If you are unable to find wire, I recommend calling to have one sent to you. I am not sure if this wire connects to the console board or is part of the console. The folks on the phone will be able to send you the part needed. The phone number to call should be located on the back of the manual.

Please let me know if you need further assistance on this problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 30, 2011
Q:

What does "E 70" mean?

A:

Without knowing the model number I can only provide general information.

I added a link below with information about the "E70" error code for Frigidaire branded front load washers and Kenmore branded washers that have a 417 prefix to the model number. An example Kenmore model number would be 417.xxxxxxxx.

Resubmit your question with the model number and any additional details for model specific information.

Why am I getting the E70 error code on my Kenmore front load washer?

Read More
Joey S -
Sears Technician
September 29, 2008